Material | Mild Steel |
Capacity | 5 ton/hour |
Power | 4.5 kW |
Surface Finishing | Paint Coated |
Voltage | 415 V |
Country of Origin | Made in India |
Phase | Three phase |
No of Cutting Blades | 1 |
Frequency | 50-60Hz |
Belt Material | Nylon |
Material | Mild Steel |
Capacity | 15 ton/hour |
Power | 12.5 kW |
Frequency | 50/60 Hz |
Surface Finishing | Paint Coated |
Voltage | 415 V |
Country of Origin | Made in India |
Phase | Three Phase |
No of Cutting Blades | 3 |
Overall Area Regd | (17*4*6) (L*B*H) In ft |
Cutting Stages At A Time | Cut the battery from two sides of all sizes below the battery top cover & under The battery plate c |
Height Setting Guide Scales | 4 |
Battery Height | 490mm |
Belt Material | Nylon |
We are successfully meeting the varied needs of our patrons by offering a wide gamut of Triple Stage Battery Cutting Machine as per their precise needs.
Details:
This machine has a automatic conveyor. Battery is placed on the conveyor. Width of Battery, need not to be set. It can accommodate Battery up to Max. Width of 305mm. Most of Batteries are less than this. This machine has three Blades for Cutting. Cutting heights of all the three blades can be set at independent heights by turning Rotary wheel. This wheel is visible in picture of machine. Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery into machine for cutting. First Cutting is set above lid so any battery which has more height than normal automotive batteries like Standby Batteries i.e. IT-500, Jumbo etc. will be cut and that portion ejects out from first window. Second cutting is set normally at sealing line of automotive battery lid and third cutting is set below strap.
During Cutting of Battery dust is confined inside of covers because cutter is enclosed. Max. Of Automotive Batteries have approximately same height, say +-10 mm. Cut Lid ejected out of first window and Strap portion of battery ejects out form second window. Remaining Battery will come out of machine on Conveyor. Machine can be provided with wheels so machine is used to unload battery at the same time cutting is performed.
This saves exposure of workman from Lead Dust; increases efficiency of organization reduces lead time as well as increases liquidity of Funds. Plastic Containers can be sent for immediate disposal/recycling facility. Lead Dust is confined inside enclosure at the same time water jets are provided by pre-fitted Pump. Water is collected in the bottom tank. This helps to separate Plastic Dust from Lead dust. Plastic dust floats and lead dust is precipitated at the bottom. Hence it becomes environmentally Sound Method to cut the Battery for further separation. Remember this Cut Battery can directly go to another attachment; we call it Acid Draining Attachment. Details of this attachment are mentioned below.